GMKG SERIES SQUARE BODY DC MOTOR
In sheet metal coverglass with stator and square cut shape GMKG 80-132-160-200 series DCmotors.This motors have various usage in industrial performans (PLASTICS, CELLULOSE&PAPER IND., WOOD WORKS, TRANSPORTATION, HEAVY INDUSTRIES LIKE METAL IND., TYRE IND., PRINTING PRESS, CEMENT WORKS AND MOTOR IND.)

SQUARE CUT SHAPES SPECIFICATIONS
Sheet metal coverglass statored and square cut shape technology help us to minimise the losts that cause by the effects of waving of armature current. By this way the system annihilate the negative currents that cause by irregular currents commutation. As a result we can gain more power, weight and torque-inertia measures in minimum body volume.

By F type enamelled and isolated windings with special glass wool and polyester supported bandages have a capacity of longe lasting against heat shocks, dinamics, mechanical and electrical heavy press in a longe period.

Stator and rotors have a high static dinamic strength resistance and isolation with the system of Vacuum Vanishing between the bandages.

If any reasons occures in the level of heat the termostatic sensors between windings will cut the contact (short circuit)in 130 base. The sensors by the help of the shunted terminals which bended to the motor terminal table must be connected in series to the DC Motors stoping circuit in a stronge lasting condition (İn maximum 3A-230 Volt). In GMKG 80-100-132-160-200 type motors compansation windings prepared for between maximum and minimum speed high proportioned and fixed powered motors. The collectors and brushholders which made up of (coverglass) lamellas, for this reason easy repairing and maintanance produced in a way to reach easily from the back cover. Fixed pressured brushholders doesn't need any adjustment or setting. But the situation of stations unshakablity of brushholders are fixed and quarantied in two way.

By the help of this brushholders you can assemble any other size of brushes. By this way you can minimise the new adjustment settings.

Rotor has been beared with two waterresistaned,full closed bearings and this bearings are continously oily. The control tests of working period are made with testing devices. The last controls made with in the real feeding conditions by the help of straighted current and partly with the tristor static unit.Our testing department has depend its quality to C.E.I national qualifications and I.E.C.recommendations. Our normal protection class is IP23, but we can also produce IP44 and more protected motors by the wishes of our consumers.